|
   .
Automatic Lathe CTL
-310R
 | Description
The
CTL-310R Lathe is specifically
designed for machining commutators (outside diameter and face) or slip rings for
rebuilding of old car starter armatures and alternator rotors.
 |
We offer the CTL-310R
with
one tool holder (for
machining the commutator surface and the riser),
but upon request it can be modified to supply two tool holders or a
multi-positioning tool holder.
|
The
Lathe features unique automatic tool positioning
system ensuring constant value of the set depth of
cutting, regardless of the O.D. and/or face
position variations. Run out is minimized by ingenious
drive vibration reducing device implemented within the lathe unit.
The CTL-310R can also be
programmed to realize machining
at a constant final value of the commutator's
diameter.
|
| Features
|
|
Unique automatic tool positioning
system
|
|
|
PLC controlled operation
|
|
|
Adjustable drive system speed
|
|
|
Adjustable drive belt tension
|
|
|
Automatic bearing journal
lubrication
|
|
|
Machining of
end-of-shaft slip rings
|
|
|
Completely enclosed working area
with electrically interlocked doors
|
|
|
Complies with
safety standards (CE) |
|
|
Dust collector outlet for swarf
removal
|
|
|
No skilled operator needed
|
|
| Specifications
Approximate readjusting time,
min |
6-8 |
|
Work piece shaft length, mm |
107
to 380 |
| Commutator/slip ring
diameter, mm |
12.5 to
55 |
| Concentricity, μm |
2-5 |
| Surface
finish,
μm |
3 |
| Accuracy run
out (TIR), μ |
5 |
| Productivity,
pieces/hour |
up
to 180 |
| Maximum
bar-to-bar deviation,
μ |
2 |
|
Air supply, psi (bar) |
65 (5) |
| Power supply |
2
HP, 220V, 50/60Hz |
| Overall dimensions,
mm |
1240
L, 900 W, 1176 H |
| Weight, kg |
450 |
Back to top
|
Note: All
specifications and dimensions are subject to change without prior notice
|
