|
   .
ARSMD-01 Automatic Rotor Slip Ring
Selection Device
Description
The device is designed to measure the radius of the slip ring of the rotors and
classify them automatically into 3 groups according to the requirements of the customer.
The first group (green lamp-CUT ) contains all rotors with slip rings larger than the
first judgment level. All these rotors can be cut to the admissible size using a lathe.
The second group (yellow lamp-BUSH ) consists of rotors with diameters between the first
and the second judgment level. On all of these rotors a new ring has to be put over the
old slip ring and cut to the right size after soldering.
The third group (red lamp -REJECT) consists of rotors with diameters smaller than
the second judgment level. These slip rings cannot be used.
Technical data
Parameter |
Value |
| 1.General parameters: |
|
Max. length of the rotor shaft, mm
|
31 |
Min. diameter of the slip ring, mm
|
10 |
Max. diameter of the slip ring, mm
|
30 |
Measuring range of the sensor, mm
|
10 |
Resolution, mk
|
10 |
Readjusting time, min
|
< 2 |
Air pressure supply, bar
|
6 |
Measuring force, N
|
<1.6 |
Filtration grade, mk
|
5 |
| 2.Overall dimension: |
|
Length, mm
|
480 |
Width, mm
|
470 |
Height, mm
|
460 |
| 3.Power supply |
upon request |
| 4.Control system: |
|
Counter
|
Mitutoyo |
Logical controller
|
PLC Direct Koyo |
| 5.Ambient temperature, deg °C |
0-40 |
| Weight, kg |
35 |
Back to top
Note: All specifications and dimensions are subject to change without prior notice
|
