O.D/I.D Cleaner for Alternator Stators

Back Up.

 

  ASC-02-WEB T-G.jpg (36170 bytes)

ASC-02 - Automatic Machine For Simultaneous Cleaning of The Outside and Inside Diameter of Car Alternator Stators

 

Description

ACS-02 is a semi-automatic machine with manual loading/unloading of the work piece.  Old paint or impregnation varnish are simultaneously cleaned from the surface of both I.D. and O.D. of car alternator stators, mainly those with smooth outside diameter surfaces. The outside surface is cleaned with a circular steel wire brush rotating with its axis parallel to the axis of the workpiece. For the inner diameter the classic sanding process is adopted, using a slotted rubber drum for the sanding band support.

 

Technical Data

Parameter

Value
Work piece  

Max. inner stator diameter, mm

130

Min. inner stator diameter, mm

80 (65 with Ø 2" sanding band)

Max. outer stator diameter,mm 

 170

Min. outer stator diameter, mm

100

Max. stator width,  mm

 35

Operation

I. D. Sanding  ,  O.D. Buffing
Workpiece drive  

Type of motor

MGT80B-8  3ph

Power, kW

0.25KW

Speed (at 60 Hz), RPM

 640

Workpiece spindle speed (at 60 Hz), rpm

 145

Driving belt

 4PJ914 DIN 7867
Sanding band spindle drive MGT71C-8  3ph/0.75KW

Spindle speed (by 60 Hz), RPM

3560

Speed of sanding band, m/s

14.2 m/s

Driving belt

 4PJ914 DIN 7867
Wire wheel brush drive MGT90L-8  3ph/2.2KW

Spindle speed (at 60 Hz), RPM

2380

Speed of brush, m/s

25m/s

Driving belt

 4PJ914 DIN 7867
Sanding band dimensions (D/W) mm 76.2 (3")/50.8(2") / 38.1 (1 1/2")
Wire wheel brush dimensions (D/W) mm 203.2 (8") / 38.1 (1.5")
Power supply 3x220V; 60Hz
Air pressure supply, bar 6
Overall dimensions, L/W/H, mm 480/475/460

 

Back to top

Note: All specifications and dimensions are subject to change without prior notice

 

 


 

 

 

 

 

 

M&T-2001 Limited  All contents copyright ©, 2001-20010     All rights reserved

 This page was last updated on February 26, 2010 01:14:39 PM