Automatic Thread Chasing Machine

TreadTCM T.jpg (42060 bytes)

TCM-2 Automatic machine for threading and thread cleaning

Description

The TCM-2 machine is designed for automatic threading (thread cutting) or thread cleaning of various rotors. The rotors are loaded manually into the feeding conveyor, which in turn automatically leads to the threading device (working position) and then continues to the outgoing conveyor.

Features

	automatic operation as a single unit or as a part of an automatic line
	gravity feeding conveyor, adjustable for different rotor lengths
	rigid design frame, a gear box drive with collet shaft tightener
	computer controlled working operations
	conveyor for outgoing rotors

Technical data

Parameter	Value
Maximum working force	500 N
Maximum driving stroke of workpiece slide	200 mm
Spindle RPM	70
Power supply	220 VAC; 60 Hz
Pneumatic supply	0.4 to 0.6 MPa

Back to top

Note: All specifications and dimensions are subject to change without prior notice

M&T-2001 Limited All contents copyright ©, 2001-20010 All rights reserved

This page was last updated on February 26, 2010 01:14:25 PM