|
   .
Automatic Commutator and Slip Ring Turning Lathe CTL- 310S
The CTL-310S is the latest of our new generation Lathes
designed to finish turning the commutator of starter armatures or alternator
slip rings.
Applicable in both the Rebuilding and the OEM Industries, the Lathe features
sophisticated turning technology based on using servo drive systems and reliable
measuring feeler unit.
Turning of both the commutator (riser-less type and regular riser type) and slip
ring (including cutting the insulation channel on newly installed sleeves) is
achieved via a specialized 2-positioning (optional) or single seated
shank-holder unit, mounted onto precision servo-driven slides.
During the turning operation, the work piece is rotated on its own bearing
journals in long lasting half bearings or diamond prisms (optional).
Upon loading the work piece onto the
bearing supports and closing the front safety door, the machine is ready to
initiate the pre-selected type of cycle that is most suitable to the
customer’s needs.
If used for Rebuilding Industry, a preliminary measuring sub-cycle will be
executed, aiming to collect dimensional information about the current work piece
while using a high precision feeler unit. If used for OEM, the measurements will
be skipped. Then, based on the collected data, the PLC control system
automatically adjusts all
necessary turning parameters, ensuring all output parameters are in accordance
with the ones preliminary set in the “Model Parameters”.
FEATURES:
 |
Servo driven slides for both axis “X and
“Z” |
|
High resolution Encoder feed-back |
|
Ultra-precision measuring feeler
unit |
|
Individually remembered turning
parameters |
|
2-position revolving type of
Tool-holder is available (optional) |
|
Multiple sophisticated turning
technologies to choose from |
|
Capabilities to cut the insulation
channels of newly installed sleeves on slip rings |
|
Friendly designed operator’s interface.
No skilled operator is required |
SPECIFICATIONS:
|
Body diameter, mm 45 – 130 |
|
Shaft length, mm 100 – 350 |
|
Commutator / slip ring diameter, mm 10 –
60 |
|
Feeding speed, mm/min 40 – 400 |
|
Positioning accuracy, μm 2 |
|
Measuring repeatability, μm 1 |
|
Run-Out, μm less than 5 |
|
Surface roughness, Rz less than 2 |
|
Readjusting time, min 2.5 – 3 |
|
Productivity, pc/h up to 150 |
|
Air Pressure supply, Bar 4.5 – 6 |
|
Power Supply, 2.5 kW, 3 phase |
|
Overall dimensions, mm L:1240, W: 940,
H: 1200
|
|
