| |
HCM-02 Automatic Hairpin Coil Forming
Machine
The HCM-02 is an Automatic Universal Hairpin Coil Forming
Machine designed
for the production of a wide range knuckle type
conductors from
single rectangular enameled wire.
The machine meets
all requirements of various Automotive and Aircraft Industries
applications such as conductors for starters, alternators and
starter-generators.
More....
|
|
|
| |
Hydraulic Armature Coil Twisting
Machine
CTM-02D
The
CTM-02D implements an original technology
for twisting of the armature’s lead wires. The advanced twisting process
makes the machine fully suitable for applications requiring high quality and
reliability such as armatures of starters and starter-generators for the
Automotive OEM and Airspace Industries.
More.... |
|
 |
|
Automatic Undercutting Machine for Micanite insulation UCM - 03S
The
UCM-03S is an Automatic High-Precision Undercutting Machine realizing
undercutting of the commutator’s mica insulation. The machine is suitable
for any type commutator regardless of the size of the armature or the number
of bars
What is more,
the UCM-03S implements the latest engineering Innovation in the
armature's commutator Undercutting process! Namely
a unique electronically-controlled skew compensation system prevents damage of
the commutator's lamellas during the undercutting process.
More.... |
|
|
Automatic Commutator/Slip Ring Turning Lathe CTL-310S
The CTL-310S is the latest of our new generation Lathes
designed to finish turning the commutator of starter armatures or
alternator slip rings.
Applicable in both the
Rebuilding and the OEM Industries,
the Lathe features sophisticated turning technology based on using servo
drive systems and reliable measuring feeler unit.
Turning of both the commutator (riser-less type and regular riser type)
and the slip ring (including cutting the insulation channel on newly installed
sleeves) is achieved via specialized 2-positioning (optional) or single
seated shank-holder unit, mounted onto precision servo-driven slides.
More...
|
|
ASC-03K is an Automatic machine for simultaneous
cleaning of both the outside and inside surfaces of alternator stators
from old paint, rust, dirt and impregnation varnish.
Cleaning of
the outside surface is carried out by two standard steel wire brushes,
while for the inside surface are utilized abrasive sanding bands. This new
model is appropriate for cleaning stators with deep and narrow outside
surface slots as well as for the ones with rectifier.
More...
|
 |
Automatic
Undercutting Machine
UCM-01S
UCM-01S is an Automatic
Bench-Type Machine realizing undercutting of the commutator micanite
insulation. This machine is suitable for any type
commutator, regardless of the size of the armature or the number of slots.
More...
|
 |
The
AYC-02S is an Automatic Universal Machine for cleaning
of the outside surfaces of field cases (yokes), solenoids and
stators from paint, rust and impregnation varnish.
More...
|
 |
Automatic Polishing Machine
APM-02D
The APM-02D is a
completely automated polishing machine, capable of simultaneous
cleaning of up to five
armature and rotor surfaces. The machine
polishes all domestic direct drive armatures
and all types of gear reduction armatures.
More...
|
|
Automatic Armature
Spot Welding Machine SWM-500RS
The Automatic Spot Welding
Machine SWM-500RS is designed for welding (brazing or
fusing process) of armature
wires to the commutator sections. The machine performs automatic
welding process after work piece loading.
More...
|
 |
Automatic Clips Forming and Inserting Machine CFI-01S
The CFI-01S Clips-Forming and Inserting Machine is a fully
automated bench type machine designed for inserting clips into
the armatures hairpins leads. This operation prepares the
armatures with riser less commutator for the subsequent
operation: Welding
with the Automatic Commutator Spot-Welding Machine SWM-500MS.
More....
|
 |
Armature Shaft Straightening Machine ASM-350
The bench
type Shaft Straightener
ASM-350 is specifically designed for automatic
straightening of armature shafts for car starter
motors. Straightening is achieved by bending the
rotating shaft and slowly releasing the bending force.
More...
|
 |
|
|
